254SMO Stainless Steel Bar

254SMO stainless steel bars are made from a highly corrosion-resistant austenitic stainless steel. They are mainly used in high-concentration chloride ion environments and highly corrosive media, such as seawater, salt water, wet chlorine, acetic acid, formic acid, acetic acid, sulfuric acid, nitric acid, etc.. On the other hand, they have good processing performance and welding performance. With high content of chromium and molybdenum, such bars are very resistant to pitting and crevice corrosion. Since this special stainless steel is a high-alloy material, the manufacturing process is quite complex. Generally, only traditional processes can be implemented to manufacture this special stainless steel, such as pouring, forging, rolling, etc.

Product Parameters

Product Name		254SMO Stainless Steel Bar
Type		Steel Bar
Outer Diameter	Round Bar	4mm-500mm
	Hexagon Bar	18mm-57mm (11/16″ to 2-3/4″)
	Square Bar	18mm-47mm (11/16″ to 1-3/4″)
	Flat Steel	1/2 "to 10", Thickness: 2mm-150mm, Can provide customized
Length		1-6 meters, Length can be customized
Standard		ASTM, AISI, JIS, GB, DIN, EN, etc.
Surface		Black, Bright Polished, Rough Turning, Mattness Surface Treatment, No. 4. BA, etc.
Scope of Application		Stainless steel bars are used in a variety of industries such as shipbuilding, Defense, Automotive, Textiles, Paper and pulp, Manufacturing, Cement, Heavy earthmoving equipment and construction, etc.

 

Chemical Composition

C	Si	Mn	Cr	Ni	Mo	S	P
≤ 0.02	≤ 0.8	≤ 1.0	19.5~20.5	17.5~18.5	6.0~6.5	≤ 0.01	≤ 0.03

 

Mechanical Properties

Tensile Strength Kb (MPa)	Yield Strength σ0.2 (MPa)	Elongation D5 (%)	Hardness
≥680	≥300	≥45	≤ 180HRB

 

Physical Performance

Density(g/cm³)	Modulus of Elasticity(Gpa)	Coefficient of Thermal Expansion(10-6/°C)	Coefficient of Thermal Conductivity(W/m*K)	Resistivity(ΜΩ. cm)
8.0	195	16.0	14.0	85

Q:What about your price?

A:Our price is very competitive because we are a factory. Pls feel free to contact us if you are interested in our products.

Q:What certifications do your products have?

A:We have ISO 9001, SGS, EWC and other certifications.

Q:What kind of payment terms would you accept?

A:We always do T/T.30% T/T as deposit,70% T/T as balance.

Q:What is your MOQ?

A:We will provide Original Mill Usually 25 tonnes, but it can be adjusted according to your needs and the actual situation of the inventory.

Q:What is the delivery time?

A:10-15 days

Our factory products comply with CE/EN10204/ASTM/classification society certificates/CASO/BIS and other certificates, and all orders are subject to TPI (SGS/TUV/BV, etc.) inspection