416 Stainless Steel Coil

416 stainless steel coil has superb mechanical properties, and its tensile strength, yield strength and elongation are higher than ordinary stainless steel. In addition, its excellent low-temperature toughness can hold good mechanical properties at lower temperatures. 416 stainless steel has excellent corrosion resistance and can maintain good stability in a range of corrosive environments. Its corrosion resistance is mainly a result of the high content of chromium, which can react with oxygen to form a dense oxide film on the surface to prevent the metal inside from corroding. Because of its excellent corrosion resistance and mechanical properties, 416 stainless steel coil is commonly used in fields including petroleum, chemical industry, pharmaceutical, food, environmental protection.

Product Parameters

Product Name	416 Stainless Steel Coil
Type	Steel Coil
Thickness	2.5mm-10.0mm
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc.
Width	610mm-2000mm
Standard	ASTM, AISI, JIS, GB, DIN, EN, etc.
Surface	BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc.
Scope of Application	Widely used in high temperature and electrical industry, medical equipment construction, chemical, food industry, agriculture and ship parts, food and beverage packaging, Kitchen supplies, trains, airplanes, conveyor belts, vehicles, bolts, nuts, springs and screens, etc.
Certificate	ISO, SGS, BV, etc.
Production Technology	Hot Rolling, Cold Rolling
Edge Processing	Edging, Trimming

 

Chemical Composition

C	Si	Mn	Cr	S	P
≤ 0.15	≤1.0	≤ 1.25	12.0～14.0	≤ 0.15	≤ 0.06

 

Mechanical Properties

Tensile Strength Kb (MPa)	Yield Strength σ0.2 (MPa)	Elongation D5 (%)	Hardness
≥540	≥275	≥20	≤ 201HB

 

Physical Performance

Density(g/cm³)	Modulus of Elasticity(Gpa)	Coefficient of Thermal Expansion(10-6/°C)	Coefficient of Thermal Conductivity(W/m*K)	Resistivity(NΩ.m)
7.80	200	9.9	24.9	570

Q:What about your price?

A:Our price is very competitive because we are a factory. Pls feel free to contact us if you are interested in our products.

Q:What certifications do your products have?

A:We have ISO 9001, SGS, EWC and other certifications.

Q:What kind of payment terms would you accept?

A:We always do T/T.30% T/T as deposit,70% T/T as balance.

Q:What is your MOQ?

A:We will provide Original Mill Usually 25 tonnes, but it can be adjusted according to your needs and the actual situation of the inventory.

Q:What is the delivery time?

A:10-15 days

Our factory products comply with CE/EN10204/ASTM/classification society certificates/CASO/BIS and other certificates, and all orders are subject to TPI (SGS/TUV/BV, etc.) inspection