316 Stainless Steel Plate

316 stainless steel is preferred in the stainless industry due to a number of key reasons. Grade 316 is the standard molybdenum-bearing austenitic grade, which is highly resistant to pitting and crevice corrosion in chloride environments. So 316 stainless steel is more commonly used in situations where higher corrosion resistance is required. For example, in marine engineering, 316 stainless steel is often used to manufacture ship parts, subsea pipelines, offshore platforms and other facilities. In the chemical industry, it is also commonly used to manufacture equipment such as storage tanks, reactors and pipelines. In addition, in the medical field, 316 stainless steel is also widely used to manufacture medical devices and implants due to its excellent biocompatibility and corrosion resistance.

Product Parameters

Product Name	316 Stainless Steel Plate
Type	Plate
Thickness	0.3mm-200mm
Length	2000mm, 2438mm, 3000mm, 5800mm, 6000mm, 12000mm, etc.
Width	40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc.
Standard	ASTM, AISI, JIS, GB, DIN, EN, etc.
Surface	BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc.
Scope of Application	Widely used in high temperature and electrical industry, medical equipment construction, chemical, food industry, agriculture and ship parts, food and beverage packaging, Kitchen supplies, trains, airplanes, conveyor belts, vehicles, bolts, nuts, springs and screens, etc.
Certificate	ISO, SGS, BV, etc.
Production Technology	Hot Rolling, Cold Rolling
Edge Processing	Edging, Trimming

 

Chemical Composition

C	Si	Mn	Cr	Ni	S	P	Mo
≤ 0.03	≤ 0.75	≤ 2.0	16.0～18.0	10.0～14.0	≤ 0.03	≤ 0.045	2.0～3.0

 

Mechanical Properties

Tensile Strength Kb (MPa)	Yield Strength σ0.2 (MPa)	Elongation D5 (%)	Hardness
≥480	≥177	≥ 40	≤ 187HB;≤ 90HRB;≤ 200HV

 

Physical Performance

Density(g/cm³)	Modulus of Elasticity(Gpa)	Coefficient of Thermal Expansion(10-6/°C)	Coefficient of Thermal Conductivity(W/m*K)	Resistivity(ΜΩ. cm)
7.99	193	16.0	16.2	74

 

Surface Selection

Name	Surface	Features	Use
Original Surface	NO.1	Silver white	Industrial tanks, chemical industry equipment, etc., thicker by the mm-10.0mm of 3.0. Uses that do not require a surface gloss
		Matte
Nlunt Surface	2D	Slightly shiny silvery white	Used for deep drawing processing, such as automobile components, water pipes, etc. General materials, deep drawing materials
Fog Surface	2B	Silver white with better gloss and flatness than 2D surface 0.39 micron roughness	Such as tableware, building materials, etc. After surface treatment to improve mechanical properties, almost all applications are satisfied.
Frosted Surface	NO.3	Has a good gloss, with discontinuous rough	Used for building interior and exterior decoration materials, electrical products and kitchen equipment.
Frosted Surface	NO.4	Has a better gloss, with discontinuous rough, stripes than NO. 3 fine	Used for baths, building interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.
Frosted Surface	NO.240	Has a better gloss, with discontinuous rough, stripes than NO. 4 fine	Used for bathroom, building interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.
Frosted Surface	NO.320	Has a good gloss, with discontinuous rough	Building Materials, Kitchenware
Frosted Surface	NO.400	Has a good gloss, with discontinuous rough	Building materials, kitchen utensils, food equipment, etc.
Brushed Surface	HL	Silver gray with hairline stripes on the 2D or 2B product with the appropriate particle size abrasive material polished to make the surface continuous grinding pattern	Mainly used in architectural decoration, elevators, building doors, panels, etc.
Bright Surface	BA	Excellent surface gloss with high reflectivity	Used for home appliances, mirrors, kitchen equipment, decorative materials, etc.
Mirror	6K	Not much worse than a mirror.	Mirror, trim panel
Mirror	8K	Like a mirror.	Mirror, trim panel

 

Q:What about your price?

A:Our price is very competitive because we are a factory. Pls feel free to contact us if you are interested in our products.

Q:What certifications do your products have?

A:We have ISO 9001, SGS, EWC and other certifications.

Q:What kind of payment terms would you accept?

A:We always do T/T.30% T/T as deposit,70% T/T as balance.

Q:What is your MOQ?

A:We will provide Original Mill Usually 25 tonnes, but it can be adjusted according to your needs and the actual situation of the inventory.

Q:What is the delivery time?

A:10-15 days

Our factory products comply with CE/EN10204/ASTM/classification society certificates/CASO/BIS and other certificates, and all orders are subject to TPI (SGS/TUV/BV, etc.) inspection