Inconel 625 Plate

The strength of Inconel 625 plate comes from the solid solution strengthening effect of molybdenum and niobium contained in the nickel-chromium alloy. These elements also give the alloy excellent corrosion-resistant properties. While the alloy is designed for strength in high-temperature environments, its highly alloyed composition gives it a high degree of resistance to general corrosion as well as resistance to a wide range of oxidizing and non-oxidizing environments. The chromium and molybdenum content make the alloy have excellent resistance to corrosion spots caused by chloride ions, and the high nickel content enhances the alloy's resistance to chloride stress corrosion cracking. The material is highly formable and easier to weld than many nickel-based alloys. Even under welded conditions, the alloy still has the ability to resist intergranular corrosion, in addition to corrosion and oxidation resistance.

 

Product Parameters

Product Name	Inconel 625 Plate
Thickness	0.3mm-200mm
Length	2000mm, 2438mm, 3000mm, 5800mm, 6000mm, 12000mm, etc.
Width	40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc.
Standard	ASTM, AISI, JIS, GB, DIN, EN, etc.
Surface	BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc.
Certificate	ISO, SGS, BV
Production Technology	Hot Rolling, Cold Rolling

 

Chemical Composition

C

Mg

Al

Si

P

S

Ti

Cr

Fe

Co

Ni

Mo

Cb (Nb Ta)

0.1 max

0.5 max

0.4 max

0.5 max

0.015 max

0.015 max

0.4 max

20.00 - 23.00

5.0 max

1.0 max

58.0 min

8.0 - 10.0

3.15 - 4.15

 

Mechanical Properties

Tensile Strength (ksi)	0.2% Yield Strength (ksi)	Elongation% in 2 inches
120	60	30

 

Physical Performance

	Units	Temperature in°C
Density	8.44 g/cm³	Room
Specific Heat	0.098 Kcal/kg.C	21°
Melting Range	1290-1350°C	-
Modulus of Elasticity	207.5 KN/mm²	21°
Electrical Resistivity	129 µΩ.cm	21°
Coefficient of Expansion	12.8 µm/m °C	21 - 93°
Thermal Conductivity	9.8 w/m-° K	21°

 

Scope of Application

This alloy is resistant to a variety of severe corrosive environments, especially to pitting and crevice corrosion. Some applications of Inconel 625 are used as part of chemical processing, aerospace, and marine engineering, pollution control equipment, and nuclear reactors.

Q:What about your price?

A:Our price is very competitive because we are a factory. Pls feel free to contact us if you are interested in our products.

Q:What certifications do your products have?

A:We have ISO 9001, SGS, EWC and other certifications.

Q:What kind of payment terms would you accept?

A:We always do T/T.30% T/T as deposit,70% T/T as balance.

Q:What is your MOQ?

A:We will provide Original Mill Usually 25 tonnes, but it can be adjusted according to your needs and the actual situation of the inventory.

Q:What is the delivery time?

A:10-15 days

Our factory products comply with CE/EN10204/ASTM/classification society certificates/CASO/BIS and other certificates, and all orders are subject to TPI (SGS/TUV/BV, etc.) inspection